TM-1080AE Automatic Stripping Blanking Machine - China Factory Suppliers for Efficient Label and Package Processing
Fiber Control Electric Forklifter
FunctionAutomatic raising — no stress loading
Capacity1.5 ton
Lowest Position85 mm
Highest Position800 mm
Legs Width550 mm
Legs Length1150 mm
Advantage
- 1Comparing to traditional stripping blanking on die cutting machine which uses gantry frame as the base for installing with stripping mould, our new design doesn't use mould for stripping — this design is space saving and convenient for operating.
- 2Servo motor and screw ball ensures a precise pile positioning.
- 3Adjustable hydraulic system — the pressures are centralized adjustable, suitable for different materials of different sizes and weights.
- 4Stripping needles (sticks) are quick and easy to change to fit different product formats and patterns — 100% could protect the products away from marks.
- 5Automatic centralized lubrication system maximally extends the service life of the machine.
- 6The operating panel adopts infrared sensors to avoid safety accidents caused by wrong operation. Also easy and quick to program with memory system on the touch screen.
- 7Safety devices and sensors keep workers away from danger.
► No blanking stripping mould/die system (easy use)
► 12KW servo hydraulic system (strong and save power)
▶ Hydraulic System Options: Le-hydraulix / Rexroth (German)
▶ With strong frame body, our machine won't be twisted so the guiding shaft won't easily expand. You don't even need to disassemble the machine if you need to change bearings or the shaft — very easy for after-service.
Our machine doesn't need a mould for stripping, and can handle many different shapes on the same sheet at the same time — one-time finishing, fast take-out. Set-up time: 20–30 minutes. No programming qualification needed. Each day can handle 80,000 sheets with 1 worker. The machine is very compact but delivers the biggest results!
Max Sheet: 1080×780mm | Max Job: 1050×750mm | Footprint: 2300×1950×1950mm
Max Sheet: 1080×780mm | Max Job: 1050×750mm | Footprint: 2300×1950×1950mm
Technical Parameters
| TM-1080AE — Technical Parameters | |
|---|---|
| Model | TM-1080AE |
| Max Sheet Size | 1080 × 780 mm |
| Min Sheet Size | 200 × 250 mm |
| Max Pile Height | 100 mm |
| Min Pile Height | 40 mm |
| Table Height | 1100 mm |
| Min Stripping Size | 80 × 120 mm |
| Max Stripping Size | 1080 × 780 mm |
| Stripping Speed | 5 times / minute |
| Max Pressure | 100 bar |
| Power Voltage / Frequency | 380V / 50Hz |
| Power | 13 kW |
| Air Requirement | 4L/Min 4–7 bar |
| Machine Dimensions | 2300 × 1950 × 1950 mm |
| Machine Weight | 4 T |
Configuration
| Part | Brand | Remark |
| PLC | INOVANCE | |
| Servo Motor (Hydraulic Station) | INOVANCE | 11 kW |
| Servo Driver (Hydraulic Station) | INOVANCE | 12 kW |
| Servo Motor (Table) | INOVANCE | 0.75 kW |
| Servo Driver (Table) | INOVANCE | 0.75 kW |
| Touch Screen | INOVANCE (WiFi Version) | 10 inches |
| Contactor | SCHNEIDER | |
| Button | SCHNEIDER | |
| Tools | SATA | |
| Tool Box | DELIXI | |
| Pins 5mm | 500 Pcs | |
| Pins 3mm | 100 Pcs | |
| Pins 12mm | 450 Pcs | |
| Pins 5mm Sharp | 50 Pcs | |
| Magnetic | 10 Pcs |
Why Choose Our Machine?
▶ Our machine does NOT need a mold for stripping or blanking. (Setup time: 20–30 minutes | 80,000 sheets/day with just 1 worker)
- 1-Time Finishing: Our machine can finish one pile job in just 3 seconds. Competing machines process sheets one by one.
- Multiple Shapes at Once: Our machine can handle many different shapes on the same paper at the same time. Competing machines can only do 1 or 2 different shapes.
- No Worker Qualification Needed: Our machine requires no special programming skills. If a worker leaves or changes, there is no problem. Competing machines require constant reprogramming and won't work if the skilled worker leaves.
- Full Max Sheet Size 1080×780mm: Our machine handles the full sheet size. Competing machines cannot process the full size because they can't retrieve the first job properly.
- Safer Operation: Finished products come out of the machine automatically — workers' hands never need to go inside. Competing machines require the operator to place hands under the machine every cycle.
- 12 kW Servo Motor Hydraulic System: Powerful yet energy-saving, with easy control over pressure, speed, and movement range. Competing machines use normal motors that must run continuously to maintain pressure.
- International Brand Components: We use internationally recognized brands for all parts and the hydraulic system, ensuring customers worldwide can easily source replacements in their own country. Competing machines use local brands only.
- Strong Body Frame Structure: Our machine body is extremely rigid and will not twist, so guiding shafts remain stable and won't expand easily. After-service is simple — no need to disassemble the whole machine for any repair or maintenance.
Frequently Asked Questions (FAQ)
Q
Does the TM-1080AE require a stripping mould or die for operation?
No. The TM-1080AE is specifically designed to operate without any stripping mould or die. This eliminates the cost and time associated with mould fabrication, reduces setup time to just 20–30 minutes, and allows workers with no special programming qualifications to operate the machine effectively.
Q
What is the maximum sheet size the TM-1080AE can handle?
The machine supports a maximum sheet size of 1080×780mm and a maximum job size of 1050×750mm. The minimum sheet size is 200×250mm, making it versatile for a wide range of packaging and printing applications.
Q
How productive is the TM-1080AE compared to conventional stripping machines?
The TM-1080AE can process up to 80,000 sheets per day with just 1 operator. It completes one full pile job in approximately 3 seconds and can handle multiple different shapes on the same sheet simultaneously — significantly outperforming conventional machines that process sheets one by one.
Q
What hydraulic system options are available for the TM-1080AE?
The TM-1080AE comes standard with a 12 kW INOVANCE servo hydraulic system. Optional upgrades are available with premium German hydraulic brands including Le-hydraulix and Rexroth, offering enhanced reliability and performance for demanding production environments.
Q
Is the TM-1080AE easy to maintain and service?
Yes. The machine features an automatic centralized lubrication system that extends its service life. Its rigid body frame structure prevents twisting, keeping guiding shafts stable. Bearings and shafts can be replaced without disassembling the entire machine, making after-service fast and straightforward.
Q
What safety features does the TM-1080AE include?
The TM-1080AE is equipped with multiple safety features including infrared sensors on the operating panel to prevent accidents from incorrect operation, dedicated safety devices and sensors throughout the machine, and an automatic product ejection system so finished products exit the machine without requiring the operator to place hands inside — ensuring a much safer working environment compared to conventional machines.
Why Choose RealStar Machinery?
You Can Contact Us Here !
For inquiries about our products or pricelist, please leave your email to us and we will be in touch within 24 hours.
inquiry
now
WHAT DO YOU WANT TO KNOWFAQ
We have made a general analysis of your questions
We believe that during the purchase and use of our paper packaging equipment, you may encounter some questions. Regarding some common issues, we have provided the following answers.
-
+ -
How fast folder gluer can run with our folder gluer collector stacker ?
30000-60000 pcs boxes per hour by one worker,60000-150000 pcs boxes per hour
-
+ -
How does automatic folder gluer running faster ?
Use our folder gluer collector stacker can improve 3 times production
-
+ -
How many workers do we need for collecting boxes ?
1 or 2 worker is enough for normal jobs
-
+ -
How much time do we need for adjust our folder gluer collector stacker ?
1 or 2 minutes can finish the adjustment,because our machine is automatic setting
-
+ -
Can we remove the folder gluer collector stacker if we don’t need it at some commplicate cases ?
Yes the machine with wheels you can push away at anytime you don’t need